35
Option 2-8: Setting Up Ward Groups
This option enables you to allocate wards to
groups, which you can then set or unset with
a single operation (as described in the User's
Guide).
Z
You can select only those wards that
are assigned to your user code.
Z
You can name each ward group using
User option 1-7 (page 12).
User 2 Menu 8
Edit Groups
1. Press [ to select this option.
Viewing Group 1
Ward : ........
2. Use | or ¬, or press a hot key (e.g. 4)
to select the ward group to edit, then
press [.
Editing Group 1
Ward > **......
3. Use the numeric keys to select the
wards to assign to the group, then press
[. Any ward numbers shown are
assigned to the group. (A “*” indicates
that the ward will not be assigned. A “.”
Indicates that either you have no
access to the ward, or the ward is not
programmed.)
4. Continue from step 2 to select another
ward group, or press ] to exit.
To Next Page
Loading...
