44
AS 04 Unset Time
>00.00
c) Enter the Unset time in 24-hour format,
(e.g. 0900 for 9:00am), then press
[.
AS 04 Unset Days
> * * * * * * *
d) Press 1 to 7 to toggle the Unset days
in or out of the display, then press [.
AS 04 Wards
>A1-8 >****....
e) Press 1 to 8 to toggle the required
wards in or out of the display. To see
wards in other ranges press r.
Z
The display shows “*” if a ward is
available for allocation to an Auto-Set,
and a number (1 to 8) when you have
selected it. The display shows “.” when
the ward is not available.
Press [ to save your changes.
Auto Set 04
21:00 - 09:00
f) The display shows the on and off times
for the Auto Set timer.
Go back to step 4 to set up the
Description and Exceptions (if you
haven’t done so already).
AS 04 Ex. 04 No
02 FEB - 02 FEB
4.3 The display shows a screen similar to
that on the left if you select Exceptions
for this Time Switch.
The top right corner of the display shows
“Yes” if the Exception applies to this Time
Switch, and “No” if it does not.
Press r repeatedly to toggle the
display between the date and the
description of the Exception.
To Next Page
