Replacement Kits
Replacement kits for the Kyle Form 6 recloser controls
are available through the factory Service Department. To
order these kits, refer to the Replacement Parts price list
S260-01 through S280-01 for catalog numbers and pric-
ing. Contact your Cooper Power Systems representative
for additional information and order procedures.
Factory-Authorized Service
Centers
Factory-authorized service centers are located through-
out the continental United States to provide mainte-
nance, repair and testing services for Kyle controls and
reclosers. For further information, contact your Cooper
Power Systems representative.
Factory Testing and
Troubleshooting Classes
The factory service department offers a basic testing and
troubleshooting course for the Form 6 microprocessor-
based recloser control. This course, taught by experi-
enced service technicians, is held at the factory’s in-
house training facility. For additional information, contact
your Cooper Power Systems representative.
Type MET Recloser Control Tester
A 30-minute video cassette program KSPV7 Kyle
®
Type
MET Electronic Recloser Control Tester Operation and
Testing Procedures is available as a supplemental train-
ing aid for service personnel.
Form 6 Recloser Control Disassembly, Reassembly, and Testing Instructions
12
ADDITIONAL INFORMATION
CAUTION: This equipment requires routine
inspection and maintenance to ensure proper
operation. If it is not maintained, it can fail to operate
properly. Improper operation can cause equipment
damage and possible personal injury. G105.1