Corghi CompactLine EM 9250 - Page 40

EM 9250 Operator’s manual 109
UK
- Use the keys to select the spoke width
1 small
2 medium
3 large
OFF deactivates the programme;
- Confirm with the key.
- Apply two new counterweights in the positions indicated.
In the motorcycle balancing programmes, the weight division operation can be per-
formed on both balancing sides.
12. UNBALANCE OPTIMISATION PROGRAMME
“OPT”
This procedure minimises any vibration still present on the vehicle while running even
after accurate balancing, thus minimising the rim-tyre coupling run-out.
Based on our experiences, the programme can be recalled every time it is convenient to
minimise the running noise produced by the vibrations mentioned above.
The calculations performed by this programme are based on the unbalance values measured
during the last spin performed which must therefore refer to the wheel being serviced.
•Pressthe key.
•Usethe keys to search for OPt.
•Pressthe key to activate the optimisation procedure.
Programme activation is indicated by the illumination of the LED
on the display panel.