EM 9250 Operator’s manual 113
UK
- Unbalance unit of measurement
- Unbalance rounding-off
- Warning OPT
- Rim diameter display unit of measurement
- Rim width display unit of measurement
- Acoustic signal
- Setting - Adhesive weight application position (CLIP - LASER h6-h12)
- LED light (if provided)
- Laser indicator (if provided)
Proceed as follows to access the configuration menu:
•pressthe key
•usethe keys to search for SEt UP
•pressthe key.
15.1. SET UP - SELECTING VEHICLE TYPE
(CAR-MOTORCYCLE)
Configuration used for enabling motorcycle wheel balancing functions.
Proceed as follows to recall this programme:
- press the key
- use the keys to search for SEt UP
- press the key to confirm
- use the keys to search for CAr on (or CAr oFF if previously set)
- press the key to change the setting:
CAr on to activate the car working environment
CAr off to activate the motorcycle working environment
- press the key to confirm and exit.
To Next Page
