EM 9250 Operator’s manual 119
UK
- press the key to confirm
- use the keys to search for biP on (biP oFF if the beeper is disabled)
- press the key to change the setting:
biP on to activate the beeper
or biP oFF to deactivate the beeper
- press the key to confirm and exit.
15.9. SET UP - ADHESIVE WEIGHT
APPLICATION POSITION
The machine makes it possible for the operator to select where the adhesive weight should
be applied based on his needs. To select this configuration, proceed as described below:
- press the key
- use the keys to search for SEt UP
- press the key to confirm
- use the keys to search for ALU H.12 (ALU CLP – ALU H.6 using the LASER
line if present)
- press the key to change the setting:
TYPE OF WEIGHT
TO BE APPLIED
CONFIGURATION
SELECTED
WEIGHT APPLICATION POSITION
Traditional clip Always 12 o'clock
Adhesive
MOTORCYCLE
programme
Always 12 o'clock
Adhesive H.12
12 o'clock in all balancing programmes
To Next Page
