HD 1300 / HD 1300 A Operator Manual 71
EN
17. Always use OSHA, CE approved and authorised personal
protective equipment (PPE) or equipment with equivalent
certification while operating the machine. Consult your su-
pervisor for additional instructions.
18. Do not wear jewellery, watches, loose clothing, ties and tie
back long hair before using the machine.
19. Wear protective, non-slip footwear while using the tyre
changer.
20. While positioning, lifting or removing wheels from the tyre
changer, wear a suitable back support and use a correct lift-
ing technique.
21. Only suitably trained personnel can use, service and repair
the machine. Repairs may only be performed by qualified
personnel. Corghi technical personnel are the most qualified
individuals. Employers must determine if an employee is
qualified to carry out any machine repair safely if the opera-
tor has attempted to make the repair.
22. The operator must pay close attention to the warnings on
the equipment labels before starting the machine.
LABEL POSITIONING
No. Code Label Description
1 462081 RISK OF HAND CRUSHING
2 446506 WORK AREA MESSAGE
3 418135 ROTATION DIRECTION
4 425211A HAZARD OF ELECTRIC SHOCK
5 446598
DISCONNECT THE ELECTRI-
CAL CURRENT BEFORE OPEN-
ING THE PANEL
To Next Page
Loading...
