EasyManua.ls Logo

Corghi HD 1300 - Fixing to the Ground

Corghi HD 1300
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HD 1300 / HD 1300 A Operator Manual 83
EN
Install the tyre changer in the chosen work posi-
tion, complying with the minimum clearances
shown in fig. 8.
Ambient conditions in the place of operation
- Relative humidity 30% - 95% without condensation.
- Temperature 0°C - +55°C.
WARNING
IMPORTANT: for the correct and safe operation of the machine, the lighting level in the
place of use should be at least 300 lux.
RISK OF EXPLOSION OR FIRE. Do not use the machine in areas that could be ex-
posed to inflammable vapours (petrol, paint solvents, etc.).
DANGER
Do not install the machine in a narrow area or below floor level
FIXING TO THE GROUND
If the machine is to be fixed to the ground, use M10
expansion plugs in the areas indicated in Fig. 9.
1500
1500
2000
2000
8
9

Table of Contents