Corghi HD 1300 - Unpacking

80 HD 1300 / HD 1300 A Operator Manual
- Weight:
•HD1300 .........................................................................................................................1000 kg
•HD1300withpackaging ..............................................................................................1120 kg
•HD1300R ......................................................................................................................1000 kg
•HD1300Rwithpackaging ...........................................................................................1120 kg
•HD1300A ......................................................................................................................1000 kg
•HD1300Awithpackaging ...........................................................................................1120 kg
•HD1300AR ....................................................................................................................1000 kg
•HD1300ARwithpackaging .........................................................................................1120 kg
- Position of the barycenter (fig.3)
•Width(E)......................................1200mm
•Depth(D).......................................1340mm
Ambient conditions for machine transport and storage
Temperature: range from -25° ÷ +55°C.
Do not stack other goods on top of the packaging or damage may result.
CAUTION!
Handling
To move the packing, insert the tines of a fork-lift truck into the slots on the base of the
packing itself (pallet) (fig.3).
Before moving the machine, refer to the HOISTING/HANDLING section.
Keep the original packing in good conditions to be used if the equipment has to be
shipped in the future.
CAUTION!
UNPACKING
Remove the upper part of the packaging and make sure the machine has not been damaged
during transport.
D
E
3