Corghi HD 1300 - Technical Data; Wheel size range; Bead breaker

HD 1300 / HD 1300 A Operator Manual 77
EN
TECHNICAL DATA
Overall dimensions:
- Maximum width .................................................................................................... 2450 mm
- Maximum length .................................................................................................... 3000 mm
- Maximum height ................................................................................................... 1550 mm
Wheel size range:
- Rim dimensions .......................................................................................... from 11” to 56”
- Maximum wheel diameter ................................................................................. . 2200 mm
- Maximum wheel weight .......................................................................................... 1700 kg
- Maximum wheel width ....................................................................................... . 1300 mm
Bead breaker:
- Bead breaking force ............................................................................................... 29000 N
- Machine weight ....................................................................................................... 1000 Kg
- Control column weight .................................................................................................18 kg
- Hydraulic fluid tank capacity ........................................................................................7,6 l
- Hydraulic oil ......................................................................................................... ISO VG 32
Noise level:
- Weighted sound pressure level A (LpA) in the work place ......................... < 70 dB(A)
- Drive systems
Model Motor rating kW
Rotation speed
(rpm)
Torque
Nm
Weight
(kg)
Hydraulic
power unit
400V/3ph/50Hz
0.98 1400 - 12
230V/3ph/50Hz
400V/3ph/60Hz
230V/3ph/60Hz
Turntable
400V/3ph/50Hz
1.3 / 1.8 4 / 8 5000 14
230V/3ph/50Hz
400V/3ph/60Hz
230V/3ph/60Hz
The noise levels indicated correspond to emission levels and do not necessarily represent
safe operating levels. Although there is a relationship between emission levels and exposure
levels, this cannot be used reliably to establish whether or not further precautions are neces-
sary. The factors which determine the level of exposure to which the operator is subject to
include the duration of the exposure, the characteristics of the workplace, other sources
of noise, etc. The permitted exposure levels may also vary according to the
country. However, this information will enable machine users to make a
more accurate assessment of hazard and risks.