92 HD 1300 / HD 1300 A Operator Manual
WARNING
When working with light alloy rims, it is recommended to use the specific clamps sup-
plied upon request (fig. 18) in order to prevent scratching or scuffing the rim. To prevent
the rim from rotating on the clamps, a pin for alloy wheels must be inserted in one of
the rim fixing holes (A, fig. 19).
18
A
19
The pressure should be reduced for weak or particularly thin rims; for thick rims that
are difficult to demount, it is recommended to adjust pressure to the maximum level.
Adjust the opening of the turntable using the "closing/opening" control (R, fig. 15) based
on the type of rim to lock (see examples in fig. 20).
20
To Next Page