Adapter Configuration
Corinex AV200 Powerline Ethernet Wall Mount F
3.3 Additional Information Page
This page shows more detailed information about the adapter.
System Information
Uptime Shows how long the adapter has been
running since the last startup.
Firmware Version Shows the detailed firmware version.
MAC Status
MAC Address Displays the unique hardware address
(serial number) of the adapter.
MAC Type This should be In-Home AV.
Node Type Shows the type of device – this can
be EP, AP or Static AP. For more
information about these types, please
see section 3.4.3.1.
Network Identifier Shows the Network Identifier. Only
devices with the same Network
Identifier can communicate with each
other.
Encryption Key Shows whether or not the network
encryption is enabled.
Network Status
IP Configuration Shows “Fixed” for set static IP
addresses, or “DHCP” if the device
receives an address from the server.
IP Address Shows the current IP Address of the
adapter.
Subnet Mask Shows the subnet mask.
Default Gateway IP Address Shows the Default Gateway.
13
To Next Page
Loading...
