EasyManua.ls Logo

Corken 521 User Manual

Default Icon
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installation, Operation
& Maintenance Manual
Sliding-Vane Stationary Pumps for LPG and NH
3
All Models 51, 521, and 1021
Solutions beyond products...
ORIGINAL INSTRUCTIONS IC101H
D51 Model
1021 Model
Warning: (1) Periodic inspection and maintenance of Corken products is essential. (2) Inspection, maintenance and installation of Corken
products must be made only by experienced, trained and qualified personnel. (3) Maintenance, use and installation of Corken products
must comply with Corken instructions, applicable laws and safety standards (such as NFPA Pamphlet 58 for LP-Gas and ANSI K61.1-1972
for Anhydrous Ammonia). (4) Transfer of toxic, dangerous, flammable or explosive substances using Corken products is at user’s risk and
equipment should be operated only by qualified personnel according to applicable laws and safety standards.
Question and Answer IconNeed help?

Do you have a question about the Corken 521 and is the answer not in the manual?

Corken 521 Specifications

General IconGeneral
BrandCorken
Model521
CategoryWater Pump
LanguageEnglish

Summary

Installation Procedures

Location, Foundation, and Piping

Optimal pump placement, foundation, inlet/outlet piping, and bypass system requirements.

Vapor Equalizing and Driver Installation

Vapor equalizing system setup and driver installation guidelines.

Operation and Maintenance

Initial Operation

Step-by-step guide for the first-time startup and operation of the pump.

Preventative Maintenance

Schedule and procedures for routine maintenance to ensure pump reliability.

Extended Storage Procedures

Procedures for protecting the pump during non-use periods.

Repair and Parts Information

Seal Replacement Instructions

Detailed steps for replacing pump seals, emphasizing cleanliness and alignment.

Repair Kits and Spare Parts

Lists of available repair kits and individual spare parts for pump models.

Technical Reference Appendices

Model Identification

Code for identifying pump models and their available options.

Specifications

Pump operating and material specifications for different models.

Performance Curves

Charts detailing pump capacity and power requirements at various operating conditions.

Outline Dimensions

Drawings and measurements for pump models, aiding in installation planning.

Parts Breakdown

Illustrated parts lists for seal assemblies and major pump components.

V-Belt Selection

Guide for selecting appropriate V-belts based on motor and pump parameters.

Troubleshooting Guide

Solutions for common pump problems, including low capacity, leaks, and noise.

Related product manuals