How to fix a blown fuse in Cornelius Ice Maker?
If your Cornelius Ice Maker has a blown fuse or circuit breaker, it could be due to a short circuit in the electrical wiring. In this case, repair the wiring. Another possible cause is an inoperable agitator motor (shorted motor), which would require replacing the gear motor.
Provides general safety guidance, the alert symbol, and hazard types.
Offers operational safety tips and defines qualified service personnel.
Emphasizes disconnecting power before performing any work on the unit.
Warns about the dangers of CO2 gas displacement and leaks.
Covers counter support requirements and proper unit placement.
Details machine usage restrictions and shipping/storage advice.
Explains the Spire 4.1's purpose, design, and key components.
Lists detailed technical specifications for the Spire 4.1 unit.
Points to a separate manual for detailed installation procedures.
Step-by-step guide to turn on the Spire unit and prepare for dispensing.
Introduces the touch-sensitive ADA keypad for navigation.
Details the specific functions of each button on the ADA keypad.
Outlines the steps for correctly filling the ice bin with ice.
Highlights important warnings regarding spills, ice type, and fill levels.
Advises on power disconnection and avoiding damaging cleaning agents.
Lists the specific soap and sanitizing solutions for cleaning.
Provides step-by-step instructions for daily cleaning tasks.
Details the monthly procedure for sanitizing syrup lines and BIB systems.
Provides instructions for the annual cleaning of the cold plate.
Warns about CO2 hazards and essential safety precautions.
Step-by-step guide for safely changing the CO2 cylinder.
To Next Page
General