36
Synchronizing the Left Heating Elements
Turning on the Triple Element
3. Touch the number from 1 to 9 on the element power settings to select the
desired power level.
The elements should glow red and radiate heat, and they should cycle on
and off periodically.
5. To turn off the element, touch the triple element keypad again if
another element keypad was touched and touch 0 on the element power
settings; or touch the power keypad to turn off the cooktop.
The element display next to the element keypad will show "H" and
indicate the element surface is still hot.
1. Touch the power keypad
cooktop.
2. Touch the Sync keypad to connect the two elements. The indicator light
at the Sync keypad will turn on, and the element display of the connected
elements will flash simultaneously.
3. Touch the number from 1 to 9 on the element power settings to select the
desired power level.
The two connected elements and the bridge elements between the two
connected elements should glow red and radiate heat, and they should
cycle on and off periodically.
4. To disconnect the left elements and turn off the bridge elements, touch
the Sync keypad for approximately 3 seconds. The indicator light at the
Sync keypad will turn off.
3 seconds to turn on the1. Touch the power keypad
cooktop.
2. Activate the triple element:
- Touch the triple element keypad
element.
most and middle elements (Dual Element). One indicator light at the
triple element keypad will turn on.
- Touch the triple element keypad again to activate the entire
element (Triple Element). One more indicator light at the triple
element keypad will turn on.
for approximately
to activate the inner most
- Touch the triple element keypad again to activate the inner
4. To change the power level, touch the triple element keypad
element again if another element keypad was touched, and touch t he
number from 1 to 9 on the element power settings to select the desir ed
power level.
for th at
for approximately 3 seconds to turn on the
To Next Page
Loading...
Need help?
General
