6
IMPORTANT SAFETY
INSTRUCTIONS
WARNING: To reduce the risk of fire, electrical shock, injury to persons, or
damage when using the cooktop, follow basic precautions, including the
following:
• For Personal Safety, remove
house fuse or open circuit
breaker before beginning
installation. Failure to do so
could result in serious injury or
death.
• ATTENTION INSTALLER - All
cooktops must be hard wired
(direct wired) into an approved
junction box. A "plug and
receptacle" is not permitted on
these products.
• Proper installation is the
responsibility of the installer and
product failure due to improper
installation is NOT covered
under warranty.
• WARNING: Installations with
Aluminum House Wiring Require
Attention:
- Improper connection of
Aluminum house wiring to
appliance copper leads can
result in an electrical hazard
or fire. Use only connectors
designed for joining copper
to aluminum and follow the
manufacturer’s recommend
procedure closely.
- Aluminum to Copper wiring
connections must conform
with the National Electrical
code, local codes and
industry-accepted wiring
practices.
- If an anti-oxidant
compound is added to the
wiring connectors, the
compound should be UL-
Listed and suitable for the
application materials,
voltage and temperature.
- Connectors for joining
Aluminum and Copper
wiring may be larger in size
than standard connectors. It
is recommended to use a
double gang, or larger,
electrical box to enclose the
connectors joining
Aluminum and Copper
wiring.
• Use this appliance only for its
intended purpose as described
in this manual.
• Never use your appliance for
warming or heating the room.
READ AND SAVE THESE INSTRUCTIONS
To Next Page
Loading...
Need help?
General
