17
ELECTRICAL REQUIREMENTS
ELECTRICAL SHOCK HAZARD
• Disconnect power before servicing.
• Use 8 gauge copper wire.
• Electrically ground cooktop.
• Failure to follow these instructions can result in death, fire, or electrical
shock.
WARNING
If codes permit and a separate ground wire is used, it is recommended that a
qualified electrical installer determine that the ground path and wire gauge
are in accordance with local codes.
Check with a qualified electrical installer if you are not sure the cooktop is
properly grounded.
Make sure that the electrical connection, grounding, and wire size are
adequate and in conformance with all local codes and ordinances, or in their
absence, with the National Electrical Code, ANSI/NFPA No. 70 - latest edition
in the United States, or with CSA Standard C22.1, Canadian Electrical Code,
Part 1 in Canada.
A copy of the above code standards can be obtained from:
• National Fire Protection Association
1 Batterymarch Park
Quincy, MA 02169
• CSA International
8501 East Pleasant Valley Road
Cleveland, OH 44131-5575
To Next Page
Loading...
Need help?
General
