26
COMPLETE INSTALLATION
CHECKING OPERATION OF THE SURFACE HEATING
ELEMENTS
Control Panel
Left Heating
Elements
Standard
Heating Elements
STANDARD SURFACE HEATING ELEMENTS
3 seconds to turn on the1. Touch the power keypad
cooktop.
2. Touch the element keypad
3. Touch the number 9 on the element power settings to select the highest
power level.
The elements should glow red and radiate heat, and they should cycle on
and off periodically.
4. Touch 0 on the element power settings to turn off the element, or touch
the power keypad to turn off the cooktop.
The element display next to the element keypads will show "H" and
indicate the element surfaces are still hot.
for approximately
for the desired element.
To Next Page
Loading...
Need help?
General
