Cowon D2+ 8GB - Charging the Battery

COWON D2+
7
Before Using COWON D2+
3. Charging the battery
To charge the internal battery of COWON D2+, connect COWON D2+ to a PC through a USB or
connect it to an AC power outlet using an adapter.
1. Connecting to PC via USB : It takes about 5.5 hours for a full-charge
2. Connecting to power outlet : It takes about 3 hours for a full-charge
- Battery status can be checked on the LCD display
- Using both USB and power adapter simultaneously may damage COWON D2+
- If you are using COWON D2+ for the first time or after using it for an extended period time, allow it to charge
for sufficient amount of period.
- It might be slow to power up depending on the battery’s charge status.
- For your safety, please use only the JetAudio AC power adapter.
- COWON AC Power adapter can be used for either 100V or 240V.(Optional)
- During the charge via an AC power adapter, COWON D2+ can be used by pressing button
- USB charging does not work if the unit is connected to a USB Hub. It must be connected directly to a USB
port on a computer.
PC
PC