Real-time Monitoring
Page 39 CXX-UM-03060-EN-01April 2019
Real-Time Report Display
To view the parameters in real-time, a flow processor must have established
communication with the PC and be communicating properly.
Once connected, click the Connect button below the Status window.
OTE:N See “Report Display” on page43 for all the variables for monitoring.
In addition to viewing all real time variables, you can also access the
following features:
The Show Graph button switches the logging information section to a small graph
of the currently selected table. To select another table, click somewhere in that
table’s data.
Use the IFC GUI data logging feature to create a log of selected data measured
over a period of time. The GUI sends information to a tab-delimited file. The
software measures the information either for a pre-programmed or manually
selected amount of time.
Figure 36: Log File field
To configure the IFC GUI to provide log reports:
1. Type or browse to a location on your computer to output data logging.
This designates the le name and location in which you wish to store
the information.
2. Type a numeric value in the Sample Rate eld to specify how often a new entry
should be placed in the data log.
3. Select either seconds (S) or milliseconds (mS).
4. Select the interval stop from the drop-down menu, by clicking the drop-down
menu, then clicking an option to select it.
To Next Page
Loading...