Flow processor Programming
Page 41 CXX-UM-03060-EN-01April 2019
Flow processor Programming
Page 41 CXX-UM-03060-EN-01April 2019
Locating Multiple EC80 Flow Processors
The Locate IFC function is for users who use many flow processors that all
communicate with a central PC. Daisy-chained flow processors, all communicating
via RS485, can be addressed individually via their corresponding Bus ID. You can
search to see which flow processors are currently connected in the loop. Since
each flow processor has its own Bus ID, each flow processor appears on this
display. Information such as the Bus ID, Firmware Revision and GUID hexadecimal
string can all be displayed in this screen.
To locate an EC80 Flow Processor:
1. Click the View menu.
2. Click Find IFC.
Figure 37: Locate IFC window
The Refresh button clears the display and begins searching again for EC80
Flow Processors.
The Get Profile button loads the currently selected flow meter’s profile into the
GUI tables so you can modify the tables.
To Next Page
Loading...