22
1
2
3
4 5
1
2
3
4
5
6
To set a Schedule rule:
1. D etermine the Start Time for your Schedule. Check the
box if you would like to add an End Time. Determine if
you want the Schedule to repeat during the set times
and then click the applicable Days.
2. D etermine the action the rule will take. Depending on
the action, you may have additional items to select.
3. Select the arming mode that the rule will apply.
4. Describe the rule.
5. Click Save.
To set an Event rule:
1. S elect a specific security zone that will trigger the action,
or select the entire system.
2. D etermine what happens at the security zone or the
security system to trigger the action.
3. S elect the action the rule will take. Depending on the
action, you may have additional items to select.
4. D etermine the time range and days of the week when
the rule is applicable. You can select any time to have
the rule apply whenever the selected event occurs.
5. Select the arming mode the rule will apply.
6. Describe the rule.
7. Click Save.
WEB ACCESS
7
To Next Page
Loading...
