25
MOBILE APP ACCESS
SECURITY
Remotely control your security system and view current
arm/disarm status.
To arm your security system:
1. On the Home screen, tap Security.
2. To bypass any Home Security Zone, tap that zone and
use the On/Off toggle.
3. On the Security screen, tap Disarmed – Press to Arm.
4. Tap Arm Stay to arm the sensors on your doors and
windows with a 30-second exit delay, or Arm Night
with no delay. Or select Arm Away to include the
motion detectors.
5. Enter your 4-digit Keypad Code to arm the system.
6. Once activated, your system’s arming countdown will
begin, and its new status will be indicated once the
system is armed.
1
2
3
5
Introduction
The iPhone® and Android
™
mobile apps allow you to
access a core set of security system functions using your
Android device, Apple® iPhone,® iPod touch® or iPad.®
The application contains only the essential functionality
available through web access.
Download the Android app in the Android Market:
http://www.android.com/apps/.
Download the iPhone,® iPod touch® and iPad® app in the
Apple® App Store.
To launch the application, tap on the Home screen of
your mobile app.
Note: This application requires your Android,
™
iPhone,®
iPod touch® or iPad® to be connected to the Internet. If you
have never set up the Wi-Fi connection for your device,
refer to your Apple documentation for instructions.
4
To Next Page
Loading...
