COX Homelife - Mobile App Home Device Control

27
MOBILE APP ACCESS
LIGHTS
Adjust all lights connected to your system via the
plug-in modules.
1. On the Home screen, tap Lights.
2. If the light is on, tap Off to turn it off.
3. If the light is off, tap On to turn it on.
4. If the light includes the dimmer function, you can adjust
its brightness by sliding the slide bar. Slide to the left to
make the light dimmer. Slide to the right to make the
light brighter.
THERMOSTATS
Adjust all thermostats connected to your system.
1. On the Home screen, tap Thermostats.
2. Tap the name of any thermostat to control that thermostat.
3. Tap to turn off the thermostat.
4. Tap to set the thermostat to Cool mode.
5. Tap to set the thermostat to Heat mode.
6. Using the hash marks, drag the temperature curve to the
desired temperature setting.
7. Tap Settings to view your current settings. Here you can:
• Turn on Hold to maintain the Heat/Cool/Off mode
and temperature you have set for the device from
the iPhone® app or Subscriber Portal, and ignore
any other programming confi gured directly on the
Thermostat device.
• Turn on Fan auto mode to have the system activate
the fan only when the Cool/Heat comes on. Turn it
off to have the fan run all the time.
1
1
2
3
4
3 4 5
6
7