Talos Operation and Service Guide
3
General Information
Overview
This Operation and Service Guide contains important information on installing, operating,
and maintaining a CPI, Inc. Talos Bill Acceptor. To obtain the best performance from your
CPI, Inc. Bill Acceptor, read this manual and the Installation Guide before installing and using
the bill acceptor.
Restrictions
For a list of compatible vending machines, consult your CPI sales representative, CPI
authorized distributer, or CPI’s web site, cranepi.com/support.
Product Summary
Acceptance Rate
• 95% or greater for $1, $5, $10, $20, $50 and $100, at nominal conditions.
Bill insertion
• Lengthwise, four way (Face up/down, either direction).
Transaction Speed
• Approximately four seconds – from bill insertion to completed bill-stacking.
Interface
• See the Interface section on Page 18 for details
Power Sources
• 90 to 135 VAC, 60Hz or 18 to 28 VAC, 60Hz, 22VDC to 45VDC or 12VDC
Power Consumption
• Standby: 5 Watts
• Acceptance: 10 Watts
• Full Stack Max: 50 Watts
Escrow
• One Bill
Shipping Weight
• Four pounds
To Next Page
