• Local Users
• TACACS+
• RADIUS
LOCAL USERS
Create users with administrative privileges by inputting usernames and
passwords in the Advanced User Management table.
TACACS+
TACACS+ stands for “Terminal Access Controller Access-Control System plus”. The router will use a TACACS+ server (or two,
optionally) to authorize administration.
Server Timeout: If the servers are not reached within the
set time (possibly because the WAN is down), the router
will automatically fall back to using Local Users mode to
prevent users from being locked out.
Authentication Service: Choose from:
• ASCII / Login
• PAP
• CHAP
Server Address: This can be either an IP address in the
form of "1.2.3.4", or a DNS name in form of
"host.domain.com". Only lower case letters are allowed for
a DNS name.
Port: Port 49 is default for TACACS+.
Shared Secret
To Next Page
Loading...
