Enterprise Cloud Manager Registration
To register your device with Cradlepoint Enterprise Cloud Manager, navigate to Getting Started → Enterprise Cloud Manager
Registration.
Input your ECM Username and ECM Password and click Register. You have now registered the device with Enterprise Cloud Manager.
If you do not have ECM credentials, see http://www.Cradlepoint.com/ecm for details or sign up at http://www.Cradlepoint.com/ecm-
signup.
IP Passthrough Setup
The CBA850’s IP passthrough function takes the IP address of the attached modem and passes it through to the LAN. By default, the
CBA850 is configured for IP passthrough. Using IP passthrough disables some of the device’s other router functionality.
There are two methods for setting up IP passthrough:
1. In the administration pages, select Getting Started → IP Passthrough Setup. Simply read through the wizard and select Enable
IP Passthrough on the second page.
2. For custom configuration, manually input IP passthrough settings in the administration pages (this is the preferred method for
network professionals). Go to Network Settings → Local Networks for most of these changes. Depending on your settings, you
may need to go to other pages as well (e.g. you may need to disable load balancing).
To Next Page
Loading...
