5
MODEL CX117 - 2HP METALCUTTING BAND SAW
As part of the growing line of Craftex metalworking equipment, we are proud to offer CX117
2HP Metalcutting Band Saw. By following the instructions and procedures laid out in this
owner’s manual, you will receive years of excellent service and satisfaction. The CX117 is a
professional tool and like all power tools, proper care and safety procedures should be
adhered to.
Motor ................................... 2HP, 230V, 60 Hz
Capacity @ 90° .................. 9.5” x 7” Rectangular & 7” Round
Speeds ............................... 90 MPM
Hydraulic Down Feed with Auto Shut Off
Coolant Pump...................... Yes
Coolant ............................... 100W
Blade Wheels ...................... 11.5"
Miter Scale........................... 0° - 60°
Noise ................................... 70 dB
Fuse .................................... 16A
Dimensions.......................... 60" Length x 20" Width x 62" Height
Approximate Weight ............ 216 Kg
Warranty.............................. 3 Years
CX117 - 2HP METALCUTTING
BAND SAW
FEATURES
To Next Page
Loading...
