Need help?Do you have a question about the Craftsman 244200 and is the answer not in the manual?
Requires the band saw to be securely bolted to a stand or workbench for stability during operations.
Specifies that the band saw is intended for indoor use only.
Details personal protective equipment like safety goggles, face shields, and ear protection.
Lists the tools required for assembling the band saw.
Instructions for securely mounting the band saw to a workbench using drilled holes and bolts.
A checklist of items to verify before operating the band saw.
Provides a brief description of basic cutting methods like crosscutting, ripping, and bevel cutting.
Instructions for cleaning and replacing band saw tires.
General maintenance tips including cleaning the table and cord.
Instructions for cleaning sawdust from the motor and using the vacuum hook-up.
Information on ball bearings requiring no further lubrication.
Procedure for adjusting the lower blade guides to support the blade without pinching.
Steps to adjust the lower thrust roller to support the blade from the rear.
Instructions for adjusting the upper blade guides to be close to the blade gullet.
Procedure for adjusting the upper blade guides to support the blade without pinching.
Steps to adjust the upper thrust roller to support the blade from the rear.
Procedure for ensuring the saw table is square to the blade using a combination square.
Information on how to order replacement parts, including required details.
To Next Page
General