Operators Manual 35
A FR ES H AP PR OA CH TO V EN DI NG
4. To return the machine to standby mode (at any point), close the front door. On returning
to standby mode, the LCD will display the standby message with the time and/or date
as selected. To re-enter the programming mode, see 6.3 Accessing the Programming
Mode.
7.7 Security Codes Menu
The security code for entry into the Operators Program is factory set so that the operator presses
button 1 on the service keypad followed by the sequence 3-3-3-3 on the drink selection interface.
On no account should this code be altered without first consulting your supervisor or manager.
Section 7 - Operatorʼs Program
To Next Page
Loading...
