2. Connect the flexi-hose (supplied with your machine) to
the water supply. Flush the system thoroughly before
connecting to the machine.
N.B. Always use the new flexi-hose as supplied with
the machine when connecting your machine to the
water supply. Never re-use a flexi-hose.
3. Ensure that the seal is correctly fitted. Ensure that all
water supply fittings are tight.
4. Turn on the water supply at the stop tap and check for
leaks.
2.3 Connecting the Electrical Supply
Safety First! Your machine must be earthed. The
electrical safety of this appliance can only be
guaranteed if it is correctly and efficiently earthed, in
compliance with National and European regulations on
electrical safety. Always ensure that the earthing is
efficient. If you have any doubts, contact a qualified
technician to check the system. On no account should
it be earthed only to the water supply pipe.
The manufacturer declines all liability for damage
resulting from a system which has not been earthed.
On no account should it be earthed only to the water
supply pipe.
The appliance must be connected to mains protected
by a certified safety switch (double pole) with a
capacity appropriate for the application and in
To Next Page
Loading...
