Page 8April, 1999
SNACK/REFRESHMENT CENTER PROGRAMMING GUIDE
1670002
LOCK OR UNLOCK MODE OR PAYOUT KEYS
1. Follow the steps in GAIN ACCESS TO THE SUPERVISOR MODE.
2. Press until the display shows either
X. LOCKED
or
X. UN-
LOCKED
. "X" refers to the number or character shown on the mode or
payout key in question (1 through 9, # and *). To see if a key is locked or
unlocked, press that key.
3. Press to change between locked and unlocked. When anyone
other than the supervisor tries to enter a locked mode, the display shows
LOCKED.
NOTE
The following mode keys cannot be locked out:
4. Press until you have left the function.
SET PRINTER OR DEX OPTIONS
1. Follow the steps in GAIN ACCESS TO THE SUPERVISOR MODE.
2. Press until the display shows one of the following:
PRINTER
means that data will be sent directly to a printer,
OR
DEX ONLY
means that data remains in memory after it is downloaded into
a portable data collection device,
OR
DEX
+
CLR
means that resettable data is cleared after it is downloaded
into a portable data collection device.
3. Press to switch between the three choices.
To Next Page
Loading...
Need help?
General
