What to do if the green light is off on my Crane Vending machine until I press a key?
If the green light is off on your Crane Vending machine's keypad until a key is pressed, simply press any key on the keypad to activate it.
General| Model | BevMAX Refresh 4 3800-4HC |
|---|---|
| Manufacturer | Crane Merchandising Systems |
| Product Types | Bottles and Cans |
| Type | Beverage vending machine |
| Power Supply | 115 VAC, 60Hz |
| Cooling system | R-134a Refrigerant |
| Payment options | coin, bill validator |
| Display | LED |
Safety precautions and procedures for machines using R290 refrigerant.
Step-by-step guide for servicing R290 units with refrigerant leaks.
Accessing and viewing error codes displayed by the VMC.
Steps for updating the VMC and peripheral board software via USB.
Using VMC diagnostic lights to identify and diagnose issues.
Steps to diagnose and resolve a complete loss of power.
Troubleshooting steps when the X or Y motors do not move.
Troubleshooting why the picker mechanism fails to dispense an item.
Diagnosing why the product delivery port door fails to operate.
Troubleshooting the port door remaining open after product removal.
Common problems and solutions for coin acceptance.
Common problems and solutions for bill acceptor issues.
Troubleshooting common issues with the Vending Machine Controller.
Flowchart for diagnosing why all coins are rejected.
Flowchart for diagnosing why all bills are rejected.
Flowchart for troubleshooting incorrect change issues.
Flowchart for diagnosing why a product selection fails to vend.
To Next Page