What to do if the green light is off on my Crane Vending machine until I press a key?
If the green light is off on your Crane Vending machine's keypad until a key is pressed, simply press any key on the keypad to activate it.
General| Brand | Crane |
|---|---|
| Model | BevMAX Refresh 4 5800-4HC |
| Category | Vending machines |
| Language | English |
Information for qualified service technicians on safe procedures when repairing, replacing, or adjusting Crane Merchandising Systems vendor components.
Details on the three-wire power supply cord, GFCI, and proper grounding requirements for the vending machine.
Step-by-step procedure for technicians to follow when addressing a refrigerant leak in an R290 unit.
Overview of the refrigeration system, its components, refrigerants, and temperature sensing.
Function to enter error readout, view codes, and access detailed information for troubleshooting.
Summary of error codes related to vend mechanism issues like motor, picker, and port errors.
Details error codes related to control system issues such as door switches, memory, and power.
Summary of error codes for coin changer issues like communication, tube sensors, and jams.
Details error codes for bill validator problems such as communication, stacker, jams, and sensors.
Summary of error codes for card reader communication and transient errors.
Summary of error codes related to refrigeration issues like temperature sensors and cooling system failures.
Lists error codes for Cabinet Control boards, including power, communication, and reset issues.
Function to set single or multiprice vending for selections.
Sets selections to be blocked during specific periods of the day.
Summary of error codes for various system components and malfunctions.
Procedure for updating VMC software using a USB flash drive, including ESD precautions.
Explanation of VMC diagnostic lights and their meaning in different operating modes.
Troubleshooting steps to identify and resolve issues when the vending machine has no power.
Troubleshooting table for issues related to coin acceptance and payback.
Troubleshooting table for issues concerning bill acceptor operation and acceptance.
Flow chart guiding through troubleshooting steps when all coins are rejected.
Troubleshooting steps for ice or frost buildup on the evaporator.
Troubleshooting steps for condensate forming on the outside of the product door.
Troubleshooting steps for when the compressor continuously runs.
To Next Page