Page 9
SNACK/REFRESHMENT CENTER PROGRAMMING GUIDE
1670002
April, 1999
4. Press until you have left the function.
LOCK OR UNLOCK DATA CLEARING ACCESS
1. Follow the steps in GAIN ACCESS TO THE SUPERVISOR MODE.
2. Press until the display shows either #
. LOCKED
or
#
. UNLOCKED
. LOCKED means that non-supervisors cannot clear
resettable machine sales and vend data from the key.
3. Press to switch between #
. LOCKED
and #
. UNLOCKED
.
NOTE
The supervisor can clear data regardless of this setting,
provided the supervisor code was correctly entered first.
4. Press until you have left the function.
SELECT PRINTER BAUD RATE (PRINTER MODE ONLY)
BAUD The speed of data transfer, expressed in bytes
RATE: per second. Your printer can receive data at a
certain rate, and you must tell the machine
what that rate is.
1. Press . One of the following is displayed:
BAUD 1200
,
BAUD 2400
,
BAUD 4800
,
BAUD 9600
2. Press until the correct baud rate for your printer is displayed.
3. Press until you have left the function.
To Next Page
Loading...
Need help?
General
