Crane Refreshment Center 797 User Manual

Page 25
SNACK/REFRESHMENT CENTER PROGRAMMING GUIDE
1670002
April, 1999
SET TEMPERATURE (SUPERVISOR MODE ONLY)
1. If your machine is configured with a refrigerated module, press ,
then press until the display shows + /- + 38 ° F . This means that
38°F is the current temperature setting.
2. Press to raise the setting; press to lower the setting.
3. Press to choose between display in °F or °C.
4. Press until you have left the function.
VIEW SOFTWARE VERSION
1. Press , and press until the display shows VER XXXXXX .
"XXXXXX" represents the curent software version number.
2. Press until you have left the function.

Crane Refreshment Center 797 Specifications

General

Brand	Crane
Model	Refreshment Center 797
Category	Vending machines
Language	English