Page 38April, 1999
SNACK/REFRESHMENT CENTER PROGRAMMING GUIDE
1670002
CLEAR PAID SALES DATA ONLY
1. Press , then press until the display shows
**
$ XX.XX
.
"XX.XX" is a dollar and cents figure showing the total of all PAID sales in
the machine (as opposed to unpaid sales like winner and free vends).
This is the total since the last time it was cleared.
2. Press and hold . Two beeps sound and the display shows
CLEARING
momentarily, and then changes to
FINISHED
. All paid sales
data is cleared; other data is not cleared.
3. Press until you have left the function.
VIEW AMOUNT IN COIN BOX (NOT SHOWN IF ZERO)
1. Press , then press until the display shows
CBX XX.XX
.
"XX.XX" is the dollar and cents amount in the coin box.
2. Press until you have left the function.
VIEW AMOUNT IN VALIDATOR (NOT SHOWN IF ZERO)
1. Press , then press until the display shows
D
BV XX.XX
.
"XX.XX" is the dollar amount in the bill stacker.
2. Press to show the quantities of bills in the stacker. For example,
the display shows
$01 20
, meaning that there are 20 dollar bills in the bill
stacker. Press again to show the quantities of other bills, such as
$5s, $10s, or $20s.
3. Press until you have left the function.
To Next Page
Loading...
Need help?
General
