Stringer Trailer Owner’s/Parts Manual
7
PN:90806-00 R090114
SAFETY
1. Keep safety decals clean and legible at all times.
2. Replace safety decals that are missing or have become
illegible.
3. Replaced parts that displayed a safety decal should
also display the current decal.
4. Decals that need to be replaced are to be placed back
in the original location.
5. Safety decals are available from your authorized dealer
or the factory.
HOW TO INSTALL SAFETY DECALS:
1. Be sure that the installation area is clean and dry.
2. Be sure temperature is above 50°F (10°C).
3. Decide on the exact position before you remove the
backing paper.
4. Remove the smaller portion of the split backing paper.
5. Align the decal over the specified area and carefully
press the small portion with the exposed sticky back-
ing in place.
6. Slowly peel back the remaining paper and carefully
smooth the remaining portion of the decal in place.
7. Small air pockets can be pierced with a pin and
smoothed out using the piece of decal backing paper.
2.10 SAFETY DECALS
Think SAFETY! Work SAFELY!
To Next Page
Loading...
