Stringer Trailer Owner’s/Parts Manual
10
PN:90806-00 R090114
Section
ASSEMBLY
4
4.1 TRAILER SPINDLE ASSEMBLY
Read all instructions to become familiar with the parts and
procedure used before starting the actual work. You may
refer to the parts catalog in the back of this manual for ad-
ditional aid.
1. Assemble in an area with sufficient space to handle
the largest component and access to all sides of
the equipment.
2. Use only lifts, cranes and tools with sufficient capac-
ity for the load.
3. When necessary, have someone assist you.
4. Do not allow spectators in the working area.
WARNING
1. Remove the securing bands, spindle and top from
stringer table.
2. Raise the table till it is perpendicular to the ground.
3. Position the trailer spindle in-line with the receiving
holes on the table either manually or with pallet forks
or a hoist.
4. Insert bolts and tighten.
To Next Page
Loading...
