Stringer Trailer Owner’s/Parts Manual
28
PN:90806-00 R090114
SERVICE & MAINTENANCE
1. GREASE: Use an SAE multi-purpose high temperature
grease with extreme pressure (EP) performance meet-
ing or exceeding the NLGI #2 rating for all requirements.
Also acceptable is an SAE multi-purpose lithium based
grease.
2. STORING LUBRICANTS: Your machine can operate
at top efficiency only if clean lubricants are used. Use
clean containers to handle all lubricants. Store them
in an area protected from dust, moisture and other
contaminants.
1. Use the maintenance checklist provided to keep a
record of all scheduled maintenance.
2. Use a hand-held grease gun for all greasing.
3. Wipe grease fitting with a clean cloth before greasing
to avoid injecting dirt and grit.
4. Replace and repair broken fittings immediately.
5. If fittings will not take grease, remove and clean thor-
oughly. Also clean lubricant passageway. Replace
fitting if necessary.
6.2 FLUIDS AND LUBRICANTS
6.3 GREASING
Figure 16: Grease Zerks Figure 17: Grease Zerks
To Next Page
Loading...
