© 2014, Crary Agricultural Solutions, LLC, All rights reserved. Produced and printed in the USA.
HOW TO REACH US
ADDRESS
TELEPHONE
FAX NUMBER
HOURS INTERNET
Tile Pro
Crary Agricultural Solutions, LLC
P.O. Box 237
Morgan, MN 56266
Monday-Friday
8 am-5pm (CST)
For Parts and Service:
Ph: 507.249.3176 •
Fax: 507.249.3146
Online: www.crarytilepro.com
GPS/LASER CONTROLS
TECHNICAL SUPPORT
PLOW SETUP/
GENERAL QUESTIONS
SALES
SUPPORT
Kenton Johnson
Ph: 507.430.5729
kenton.johnson@crarytilepro.com
Wayne Weber
Ph: 507.828.4548
wayne.weber@crarytilepro.com
Stan Isfeld
Ph: 504.430.7677
stan.isfeld@crarytilepro.com
DISCLAIMER
This document is based on information available at the time of its publication. While efforts have been made to be ac-
curate, the information contained herein does not purport to cover all details or variations, nor to provide for every pos-
sible contingency in connection with installation, operation, or maintenance. Features may be described herein which
are not present in all systems. Crary Agricultural Solutions assumes no obligation of notice to holders of this document
with respect to changes subsequently made.
Crary Agricultural Solutions assumes no responsibility for the accuracy, completeness, suffi ciency, or usefulness of the
information contained herein.
SPECIFICATIONS AND DESIGN ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Crary Agricultural Solutions is continually making improvements and developing new equipment. In doing so, we re-
serve the right to make changes or add improvements to our product without obligation for equipment previously sold.
Because modifi cation to this machine may affect the performance, function, and safety of its operation, no modifi cations
are to be made without the written permission of Crary Agricultural Solutions. Part replacements should be with original
equipment supplied by Crary Agricultural Solutions.
THE CRARY AGRICULTURAL SOLUTIONS STATEMENT OF PRODUCT SAFETY
As a manufacturer of specialized agricultural equipment, Crary Agricultural Solutions fully recognizes its responsibility
of providing its customers products that perform their expected use in a reasonably safe manner. Safety considerations
shall be an integral and high priority part of all engineering/design analysis and judgments involving Crary products. It
is our stated policy that our products will be manufactured to comply with the safety standards specifi ed by the American
Society of Agricultural Engineers, the National Electrical Code, the Society of Automotive Engineers, and/or any other
applicable recognized standards at the time manufactured. However, this statement should not be construed to mean
that our product will safeguard against a customer’s own carelessness or neglect in violating common safety practices
specifi ed in each product’s manual, nor will we be liable for any such act.
SERIAL NUMBER LOCATION
Always give your authorized Crary dealer the serial number
of your machine when ordering parts, requesting service, or
any other information. The serial number decal is located on
the front, left hand end of the air manifold.
Please record the serial number in the space provided on
the front cover and on the warranty and registration card.
Serial Number Decal
To Next Page
Loading...
