CRE Technology UNIGEN Plus - User Manual

Unigen Plus & Industrial Unigen - User technical documentation
A51Z090004
-D page 1/19
November 2006
Synchronization and load sharing module
Technical documentation
CRE technology believes that all information provided herein is correct and reliable and reserves the right to update at
any time. CRE Technology does not assume any responsibility for its use unless otherwise expressly undertaken.
A51Z090004-D.doc
CRE technology
Allée Charles-Victor Naudin - Zone des Templiers - Sophia Antipolis
06410 BIOT - FRANCE
Téléphone : + 33 (0)4.92.38.86.82 - Fax : + 33 (0)4.92.38.86.83
Internet: http://www.cretechnology.com

CRE Technology UNIGEN Plus Specifications

General

Brand	CRE Technology
Model	UNIGEN Plus
Category	Control Unit
Language	English

Summary

Overview

Unigen Unit Description

Diagram showing terminal connections for Industrial Unigen and Unigen Plus units.

Unigen Core Functionality Overview

Overview of synchronization, load sharing, and speed governor compatibility.

Features

Synchronization and Control Features

Synch check relay, reverse kW relay, and remote speed control inputs.

Unigen Load Sharing Modes

Isochronous, CAN bus, Droop, and manual load sharing configurations.

Parallel Operation Modes

Command Mode and Mains Paralleled operation for Unigen Plus.

Communication Protocols

Modbus RTU communication via RS485 for data exchange.

Settings and Configuration

Synchronization and Speed Settings

Adjustments for synchronization gain and speed control output offset/gain.

Load Control Settings

Ramp time, kW monitor, and voltage control output adjustments.

Switch-Based Configuration

DIP switch settings for various operational modes and features.

Display and Indicators

LED Status Indicators

Description and function of various LEDs on the UNIGEN unit.

Terminal Connections

Terminal Mapping and Description

Detailed list of terminals, wire recommendations, and their functions.

Electrical Schematics and Specifications

Wiring diagrams and electrical specifications for terminal connections.

Commissioning Procedures

Installation Safety and Guidelines

Cautions on grounding, wiring, and vibrations for safe installation.

Step-by-Step Commissioning

Comprehensive guide for initial setup, configuration, and testing of the UNIGEN unit.

Environmental Specifications

Operating Environment and Protection

Details on operational temperature, humidity, altitude, and protection.

Physical Dimensions

Unit Size and Mounting Details

Physical size, mounting hole details, and grounding nut location.