Creality BL Touch - Input and Save Z Offset

2. Input the Z-axis compensation value(Z offset value)
Record the Z offset value, then follow below steps and
save settings:
Prepare → Auto home → Control → Bed Leveling→
Probe Z offset → Input the Z offset value → Store
Settings
Info Screen
Prepare
Control
No TF Card
About Printer
Main
Move Axis
Auto Home
Set Home Offsets
Disable Steppers
Info Screen
Prepare
Control
No TF Card
About Printer
Main
Temperature
Motion
Bed Leveling
Filament
Probe Z Offset:
-0.300
BL Touch
Bed Leveling
Filament
Store Settings
Load Settings