3. Copy the firmware to the SD card.
Note: the SD card can only hold one firmware file.
Note: Every machine has different firmware files.
Ender-x
xxxxxx ...
Ender-x xxxxxx-vxxx-BLTOUCH
File download website:
https: www.creality.com/download/
2.Firmware download (before
downloading firmware, please
confirm your printer model,
motherboard version, and hard-ware
configuration-whether it comes with
filament sensor or not).
Each printer model corresponds to the BL Touch
firmware, please check appendix 1.
To Next Page
Loading...
