Do you have a question about the Creality CR-3040 Pro and is the answer not in the manual?
Build Volume | 300 x 300 x 400 mm |
---|---|
Printing Technology | FDM (Fused Deposition Modeling) |
Filament Diameter | 1.75 mm |
Connectivity | USB, SD Card |
Display | 4.3-inch Touchscreen |
Max Nozzle Temperature | 260°C |
Nozzle Diameter | 0.4 mm |
Supported Materials | PLA, ABS, PETG, TPU |
Bed Leveling | Automatic |
Max Heated Bed Temperature | 100°C |
Power Supply | AC 110V/220V |