Creality CR-3040 User Manual

◆ Because of software or hardware upgrades and model differences,
new revisions may not be listed in this Manual.
◆ Please plug the power cord into a three-hole power jack.
◆ Detailed instructions for use are available in the storage card.
V.2.0
3D Printer User Manual
Applicable Models：
CR-5/CR-5S/CR-3040
CR-4026/CR-4040
CR-5060/CR-5080 etc.

Creality CR-3040 Specifications

General

Brand	Creality
Model	CR-3040
Category	3D Printers
Language	English

Summary

Introduction

General List

Device Installation

Screen Information

Info Screen

Display information about printer status and settings.

Prepare Menu

Access functions like Auto Home, Leveling, and Preheat.

Control Menu

Manage temperature, fan speed, and restore settings.

Printing and Tune Options

Adjust print speed, temperatures, fan, and flow; pause/stop print.

Loading Filament

Preheat Process

Steps to preheat the nozzle before loading filament.

Filament Feeding

Process of inserting filament into the extruder.

Filament Replacement Tips

Methods for replacing filament efficiently.

Bed Levelling

Software Installation

First Printing

Dual-Color Printing Guide

Guide for dual-color printing setup and execution.

After-Sales Service

Replacement and Return Policy

Conditions for product replacement or return.

Warranty Coverage Details

Details on what is covered and not covered by the warranty.

Usage Statement

Declaration regarding legal use and prohibited printing.