Creality CR20Pro User Manual

Loading Filament
Preheat
Method 1
Feeding
Method 2
Press and hold the extruder lever then
insert the 1.75mm filament through the small
hole of the extruder. Continue feeding until
you see filament come out the nozzle.
Tip：How to Replace the Filament？
1、Cutting filament near the Extruder and
slowly feed new filament until they are fed
into the new filament.
2、Preheating the nozzle and withdraw the
filament quickly and feed the new filament.
6

Creality CR20Pro Specifications

General

Brand	Creality
Model	CR20Pro
Category	3D Printers
Language	English