Need help?Do you have a question about the Creality Ender-3 and is the answer not in the manual?
General| Build Volume | 220 x 220 x 250 mm |
|---|---|
| Layer Resolution | 0.1-0.4 mm |
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Max Nozzle Temperature | 255°C |
| Max Bed Temperature | 110°C |
| Connectivity | SD card, USB |
| Supported Materials | PLA, ABS, TPU, PETG |
| Frame Material | Aluminum |
| Printing Technology | FDM (Fused Deposition Modeling) |
| Machine Dimensions | 440 x 410 x 465 mm |
| Display | LCD |
| Bed Leveling | Manual |
| Print Speed | 180 mm/s |
| Power Supply | 24V |
To Next Page
