Australia New Zealand
www.jaycar.com.au www.jaycar.co.nz
techstore@jaycar.com.au techstore@jaycar.co.nz
1800 022 888 0800 452 922
Page
3
of
3
Blockages should not occur at the nozzle and should be more prone to other areas;
which can be easily removed by disassembling the nozzle assembly. TH1766 would
help with this, as with TD2132.
Thermocouple errors usually show through abnormally high temperature readings while
the nozzle is still cold to touch. It is held in place by a small screw located on the side of
the nozzle.
To Previous Page
Loading...
Need help?
General
