Creative iRoar User Manual (English)

Questions and Answers:

A
Austin JonesJul 27, 2025
How to fix a Bluetooth link issue between my device and Creative iRoar Speakers?
- L
  Lisa BentleyJul 28, 2025
  If you're having trouble establishing a Bluetooth connection between your device and the Creative iRoar speakers, here are a few things to try: * First, make sure your Bluetooth device supports the A2DP profile. * Then, remove the iRoar from your device's paired memory list and re-pair them using either One-touch NFC or manual Bluetooth pairing. * Also, ensure that neither your Bluetooth device nor the iRoar is connected to any other devices. * Finally, some devices may require you to manually select iRoar as the default output device after pairing.
L
Lori GriffithAug 2, 2025
What to do if my Creative Speakers iRoar cannot be powered on?
- A
  Ashley StanleyAug 2, 2025
  If your Creative iRoar speakers aren't turning on, here's what you can do: 1. First, check the battery. Make sure the speaker has enough power; at least one LED should be lit on the battery indicator. 2. If the battery seems low, connect the speaker to a power source using the provided adapter or USB cable (from a computer or laptop). 3. If the internal battery is completely empty, charge it for about an hour before trying to turn it on again.
E
Emily FinleyAug 8, 2025
Why I am unable to pair my Bluetooth NFC-enabled device with Creative Speakers iRoar?
- R
  ramosstevenAug 8, 2025
  If you're having trouble pairing your Bluetooth NFC-enabled device with the Creative iRoar speakers, try the following: * First, ensure that NFC is enabled on your device. * Make sure that neither your NFC-enabled device is connected to other Bluetooth devices, nor the iRoar is connected to two Bluetooth devices. Then, try again. * If you still face issues with only one Bluetooth device connected, pause the music before tapping another NFC device to connect. * Consider updating your NFC-enabled Bluetooth device firmware and repeating the first two steps.
L
larsonjoannaAug 14, 2025
What to do if Bluetooth is connected to Creative Speakers iRoar but there's no music?
- T
  timothy30Aug 14, 2025
  If you've successfully paired your devices to the Creative iRoar speakers via NFC or manually, but there's no music playing, here's what could be happening: * If the device you paired is the second one connected to the speaker, and the first device is currently streaming music, you'll need to stop the music on the first device to allow the second device to play. * With some computers that have built-in Bluetooth, USB Bluetooth dongles, or other devices, you might need to manually set the audio output to iRoar.
B
Bonnie PatrickAug 20, 2025
Why Creative Speakers iRoar doesn't power off automatically?
- M
  Mark RogersAug 20, 2025
  Your Creative Speaker iRoar may not power off automatically due to several reasons: * Ensure there are no Bluetooth devices connected to the speaker and that the Aux-in port does not have any music or noise signal. * Also, make sure the speaker is not in the following modes: audio playback from a microSD card, or recording onto a microSD card. * Note that when a device is connected to the speaker via a USB cable, power is supplied through the connected USB cable via DC out (USB output), even when the speaker is off.

Creative iRoar Specifications

General

Type	Portable Bluetooth Speaker
Battery Life	Up to 20 hours
Bluetooth Profile	A2DP, AVRCP, HFP
NFC	Yes
USB Charging	Yes
Microphone	Built-in
Water Resistance	No
Roar Technology	Yes
Sound Blaster Engine	Yes
Bluetooth Version	Bluetooth 4.0
Weight	1.1 kg
Power Output	40W
Inputs	3.5mm audio jack, USB, microSD
Audio Codec	aptX, AAC, SBC
Battery Type	Lithium-ion
Frequency Response	20 Hz - 20 kHz